Call (954) 707-6348
Specialty Services 2026-06-22 views

Complete Guide to Specialty Painting & Home Services in South Florida

← Back to Blog

Beyond standard interior and exterior painting, South Florida homeowners and businesses often need specialty services. These include pressure cleaning, cabinet painting, drywall repair, aluminum painting, and caulking — each with its own techniques, materials, and cost factors.

This guide covers the most requested specialty services in South Florida.

Pressure Cleaning

Pressure cleaning (also called power washing) uses high-pressure water to remove dirt, mildew, algae, and loose paint from exterior surfaces. It's the essential first step for any exterior paint job and a standalone service for maintaining your home's appearance.

What It's Used For

  • Home exteriors (stucco, brick, wood, vinyl siding)
  • Driveways, sidewalks, and patios
  • Roofs (low pressure only — soft washing)
  • Decks and fences
  • Commercial properties
  • Pressure Cleaning Myths

    Many homeowners think pressure cleaning is just spraying water. Professional pressure cleaning involves:

  • Applying biodegradable cleaning solutions to kill mildew and algae (essential in Florida)
  • Using correct pressure settings for each surface (too much pressure damages stucco and wood)
  • Proper technique to avoid forcing water behind siding or under roof tiles
  • Environmentally responsible runoff management
  • For properties in Boynton Beach, Delray Beach, and Deerfield Beach where humidity accelerates mildew growth, annual pressure cleaning is recommended.

    Cost

    Most South Florida homes: $250-$500 for a single-story home. Add $100-$250 for two stories. Driveways and walkways: $100-$300.

    More details in our pressure cleaning cost guide for Boynton Beach.

    Cabinet Painting

    Painting kitchen cabinets is one of the highest-ROI home improvements. It transforms your kitchen for a fraction of the cost of replacing cabinets.

    Why Paint Instead of Replace

    New custom cabinets cost $10,000-$30,000 for an average kitchen. Painting existing cabinets costs $1,200-$3,000. The savings can be 80% or more.

    The Process

    Cabinet painting is more involved than wall painting:

    1. Remove all doors, drawers, and hardware

    2. Clean thoroughly with degreaser (kitchens accumulate grease)

    3. Sand all surfaces for paint adhesion

    4. Prime with stain-blocking primer

    5. Apply 2-3 coats of cabinet-grade paint

    6. Reinstall hardware and adjust doors

    Best Paint for Cabinets

    Use a cabinet-specific paint like Benjamin Moore Advance or Sherwin-Williams ProClassic. These self-level for a smooth, factory-like finish. Semi-gloss and satin are the most popular sheens.

    Cost

    Average South Florida kitchen: $1,200-$3,000 depending on cabinet count and complexity. A separate island adds $200-$500.

    Drywall Repair

    Drywall damage is common in South Florida homes, especially from humidity, settling, and hurricane-related moisture.

    Common Repairs

  • Nail pops and small holes: $50-$150 per spot
  • Water damage (from AC leaks or roof leaks): $200-$800
  • Large holes (doorknob, furniture impact): $150-$400
  • Texturing and blending: $100-$300 per room
  • Why Professional Repair Matters

    Florida's humidity makes drywall repair trickier. Joint compound dries slower. Texturing must match existing patterns. Improper repairs crack and show through paint within months.

    Aluminum Painting

    Aluminum surfaces — garage doors, awnings, carports, and commercial storefronts — need special preparation. Standard paint peels off aluminum quickly.

    Proper Preparation

    1. Clean with TSP (trisodium phosphate) to remove oxidation

    2. Sand lightly for adhesion

    3. Apply self-etching primer (bonds chemically to aluminum)

    4. Paint with exterior acrylic or enamel

    South Florida homes in coastal areas like Aventura and Hollywood, where salt spray accelerates aluminum oxidation, benefit most from professional aluminum painting.

    Caulking and Water Sealing

    Caulking seals gaps around windows, doors, and trim. In Florida, it's critical for preventing water intrusion during hurricanes.

    Where Caulk is Needed

  • Window and door frames
  • Where siding meets trim
  • Around pipe penetrations
  • Joints between different materials (wood to stucco, etc.)
  • Types of Caulk for Florida

  • Silicone: Best for exterior use. Flexible, waterproof, UV-resistant.
  • Acrylic latex: Good for interior. Paintable. Less flexible.
  • Polyurethane: Industrial grade. Very strong. Difficult to apply.
  • ---

    Need one of these specialty services? Call All Brite Painting at (954) 707-6348. We handle everything from pressure cleaning to cabinet painting across South Florida.

    specialty painting services pressure cleaning florida cabinet painting south florida drywall repair aluminum painting

    Ready to Transform Your Home?

    Get a free estimate from South Florida's most trusted painting contractor. 25+ years of experience, $2M insurance, up to 10-year warranty.

    Call (954) 707-6348